AL40 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC or 220 V DC.
These contactors are of the block type design with:
– 3 main poles and 1 built-in auxiliary contact
– control circuit: low consumption (3.5 W at pull-in and holding) DC operated with solid core magnet
Suitable for direct control by PLC outputs (the polarity on the coil terminals A1+ and A2- must be
respected)
– add-on auxiliary contact blocks for front or side mounting and a wide range of accessories.

AL40 contactors:

AL9-30-10 24V DC
AL9-30-01 24V DC
AL30-30-10 24V DC
AL26-30-10 24V DC
AL16-30-10 24V DC
AL40-30-10 24V DC